Car restoration is one activity that will leave you with a high sense of accomplishment. It is an activity that demands persistence, dedication and money!to say nothing about time. Fords and Chevy's are the two models that are the easiest to start with as there are always parts available as the need arises.

Before any car restoration you will need to arrange your shop for the task at hand. Collect the materials needed such as a camera, a few cardboard boxes, a sharpie and some tags for labels. It is important to keep track of the parts that are taken off sooner rather than later. When it is time to start taking the car apart you need to estimate what needs to be replaced and what needs to be repaired. In this way will make sure you are not wasting parts at any time during the car restoration process.

Take inventory of the parts as you pull them off by separating them into two separate cartons labeled replace and repair. Take pictures of them as you do this so you know what the car looks like with them on and off. This method will also aid you in determining how much the cost will be and how long it will take you to complete the car restoration.

Once you have all the parts removed you can start the cleaning process. The cleaning process of the car restoration entails the car be reduced to bare metal. This can be done through several methods although you will need to find one that you feel the most comfortable with. The easiest way by far is to have the car dipped in acid. This removes dust, rust, and other foreign materials.

Now you will see the damage to the car once it's stripped. You could find rust holes, damaged floorboards, and dents. But do not despair! Even if the car didn't look very bad when you purchased it you must realize that this car has had a been through many miles life. You only want to add to it right? So get busy and take that Sharpie to mark all the things that either need replacing or repairing.

It is time to patch up all those dents, holes, and other areas in order to get set for sanding. You will use several grades of sandpaper throughout the sanding procedure starting with 36 to 80. Once you have finished this step you are ready to apply the glazing. Begin with 220 wet grit sandpaper and proceed to 800 wet grit sandpaper. This will leave your car with a hazy mirror image and also provide a preventative measure against scratches.

Your car restoration is finished! You are now ready to show off your beautiful car to the neighborhood with pride.

For All The Essential Information On Car Restoration go to: Car Restoration Tips